Be sure to check out some more fun-fold cards on the CCEE Stampers blog.
Thursday, March 29, 2018
CCEE1813 Fun Folds
For her last challenge of the month, Vicky picked one that is very close to my heart -- FUN FOLDS! I love doing fun folds, so I was so happy to comply. I used a technique I've only done once before -- a panel pull-out card.
Monday, March 26, 2018
Spring Basket with Bunnies
Today is my final opportunity to show off an Easter card on the CottageCutz blog. I used one of the dies from the Spring/Easter release, as well as a basic shape die I recently acquired -- the Nested Wacky Stitched Rectangles.
To start my card I cut the Spring Basket images from a piece of white cardstock and placed them on my sticky board. For some reason they look blue on this photo; but please believe me, they are white.
Using some Copic markers, I colored each one of the pieces. The packaging shows the basket all in one color, but I wanted to make it look a bit more realistic.
I then cut the pieces for my card base:
White cardstock - 8 1/2" x 5 1/2"
Purple cardstock - 4" x 5 1/4" and 3" x 4"
Patterned paper - 3 7/8" x 5 1/8"
The pale purple cardstock was cut using the second largest Nested Wacky Stitched Rectangle die.
This was then attached to the card base using large foam pop dots, and a small Easter greeting was stamped in the corner. You can see how these foam dots, as well as the ones behind the chick and tan bunny, give the card some dimension.
Here again is my finished card.
CottageCutz dies used on my card are:
To start my card I cut the Spring Basket images from a piece of white cardstock and placed them on my sticky board. For some reason they look blue on this photo; but please believe me, they are white.
Using some Copic markers, I colored each one of the pieces. The packaging shows the basket all in one color, but I wanted to make it look a bit more realistic.
I then cut the pieces for my card base:
White cardstock - 8 1/2" x 5 1/2"
Purple cardstock - 4" x 5 1/4" and 3" x 4"
Patterned paper - 3 7/8" x 5 1/8"
The pale purple cardstock was cut using the second largest Nested Wacky Stitched Rectangle die.
I layered the patterned paper on the larger purple rectangle and adhered them to the white card base. Then I assembled the die-cut pieces onto the pale purple die-cut piece and adhered it to the smaller purple piece.
Here again is my finished card.
CottageCutz dies used on my card are:
Sunday, March 25, 2018
Pinterest-Inspired Z-Fold Box Card
Once a month a member of the Scor-Pal design team looks for inspiration on our Pinterest board and recreates the project to make it her own. My inspiration this month is a Z Box Fold Card created by Lyndsey on The Craft Blog. This is her card.
I cut an 8 1/2" x 11" piece of brown cardstock into three panels:
1 piece 4 1/4" x 11"
2 pieces 2 1/8" x 11"
I scored the larger panel and one of the small panels at 2 3/4" and 5 1/2".
I then applied patterned paper (cut 1/4" smaller on both sides) to the various sections of each panel.
The original card had a sentiment on the small panel on the right, but I wanted to add something more appropriate to the scene. So I Googled some free clip art and found some luggage and a bird cage. The luggage I printed onto cream cardstock, and the birdcage I printed on a piece of acetate. I cut them out with scissors.
To make my card I used a brand-new stamp set from Kindred Stamps called Students of Magic. Kindred Stamps has a large selection of pop culture stamps, including a single stamp called Owl Post, which is perfect for decorating the accompanying envelope.
I started my card by stamping and coloring the three young wizards in the stamp set. After they were colored, I cut them out.
I cut an 8 1/2" x 11" piece of brown cardstock into three panels:
1 piece 4 1/4" x 11"
2 pieces 2 1/8" x 11"
I scored the larger panel and one of the small panels at 2 3/4" and 5 1/2".
I then applied patterned paper (cut 1/4" smaller on both sides) to the various sections of each panel.
On the reverse side of the smaller panel I applied Scor-Tape at each end, as shown in the photo.
I then adhered this smaller panel to the larger panel, slightly above the bottom edge.
The other 2 1/8" x 11" strip of brown cardstock was scored as follows: 7/8", 3 5/8", 4 1/8", 6 7/8", 7 3/8" and 10 1/8". I adhered panels of patterned paper to the "front" panels of this inner strip . . .
. . . and inserted it into the box.
I then cut an inverted scalloped circle from the same brown cardstock and added Scor-Tape strategically in order to adhere it to the front of the card.
I added a smaller circle of patterned paper and one of the wizards to the front of the circle and adhered the circle to the front of the card. You can't see it well, but I added some clear glue to his glasses.
I cut two small strips of acetate, attached them to the other two wizards, and placed them "in the box." Using stamps from a Just Rite set, I made the train platform sign and attached it to the back wall.
Notice that I cut out two of the small brown suitcases. When I adhered them to my card, I added the second brown suitcase with foam dots to make a little 3-D effect. I stamped the owl from the stamp set, cut him out, and adhered him to the card above the suitcase. When I adhered the acetate birdcage over the owl so it looks like he's inside the cage, it was a little difficult to see the cage. So using a Faber Castell XS black pen, I went over the cage lines. This made the cage a bit more noticeable.
I then stamped the "Owl Post" image to the lower left-hand corner of my envelope.
And now my project was complete.
And now my project was complete.
Thursday, March 22, 2018
CCEE1812 National Goof-Off Day
Vicky has a fun challenge for the CCEE Stampers today. She's celebrating National Goof-Off Day. She says it's one of her "favorite days evah!" She asked us to make a funny card . . . any kind of card, just so that it's funny. I hope my card is funny enough for her.
For some more humor, be sure to check out the CCEE Stampers blog.
For some more humor, be sure to check out the CCEE Stampers blog.
Monday, March 19, 2018
Miss Petunia Bunny
CottageCutz's Spring/Easter release has lots of cute dies. I'm using three of them on my card today -- Happy Easter Phrase, Miss Petunia Bunny, and Spring Meadow. Before I explain about my card, I first wanted to remind you that there is a 25% discount sale on the newest Rise and Shine in the CottageCutz store, with lots of cute breakfast and cooking dies. Be sure to check them out while the sale continues.
And now for my card:
Before cutting out the dies, I put a sheet of two-sided adhesive on the back of a piece of white cardstock to make adhering the smaller die-cuts easier. To tell the truth, I waver back-and-forth between using the adhesive sheets and not. Either process will work well if you have a fine-tip applicator on your glue for when you don't use the adhesive sheet.
After cutting out the pieces, I colored them and constructed each element. I used a black mini brad for Miss Petunia's eye.
And now for my card:
Before cutting out the dies, I put a sheet of two-sided adhesive on the back of a piece of white cardstock to make adhering the smaller die-cuts easier. To tell the truth, I waver back-and-forth between using the adhesive sheets and not. Either process will work well if you have a fine-tip applicator on your glue for when you don't use the adhesive sheet.
After cutting out the pieces, I colored them and constructed each element. I used a black mini brad for Miss Petunia's eye.
Then I gathered the supplies for my card base:
White cardstock - 8 1/2" x 5 1/2"
Sky patterned paper - 4" x 5 1/4"
Brick patterned paper - 4" x 1 1/2"
Green cardstock to cut the grass from the Spring Meadow die
I then constructed my card base, adding the "Happy Easter" phrase.
After slipping Miss Petunia between the rows of grass, I placed the egg on the wall, and stuck the flowers (from the Happy Easter Phrase die) to the stems within the grass. I tend to work "by the seat of my pants" and realized that the phrase didn't really stand out as much as I had envisioned, so I pulled out my Dark Green Wink of Stella brush and went over the lettering. I was much happier with the result -- it now glitters!
CottageCutz dies used on this card are:
Thursday, March 15, 2018
CCEE1811 St. Patrick's Day/Green
This week Vicky asked the CCEE Stampers to celebrate St. Patrick's Day a bit early by making a card indicative of the holiday -- either a St. Patrick's Day card or one with green as the focal color. My Irish ancestors would not forgive me if I didn't choose the first option. I used a technique I haven't done in a while -- Retiform. If you've never done this fun technique, here's a tutorial from Splitcoaststampers.
Be sure to visit the CCEE Stampers blog for some more green.
Tuesday, March 13, 2018
Kindred Stamps Students of Magic
I was so excited when asked if I would guest design for this new set from Kindred Stamps -- Students of Magic. It is a re-design of Wizard Friends, which I absolutely loved. But I have to say, this new set blew my mind.
I went to work as soon as I received it in the mail. I'm going to wear out those stamps if I'm not careful. I have six cards to show you.
The first card is a favorite technique of mine -- Triple Stamping. I used two of the smaller images, stamped multiple times; but the focus of the card is the sentiment. It could be a philosophy for all of us to follow!
My next card is relatively clean-and-simple. I was so happy with all the additional characters included in this new stamp set. I used one of the additional characters (as well as the bespectacled guy!) on this card.
We have a little bonus this month. Kindred Stamps has a digital image called Magic School, which coordinates with Students of Magic. I wanted to make a card spotlighting this digital stamp.
I hope you've enjoyed what I did with this super 6 x 8 Students of Magic set. Now, you get to go
visit my friends on the Kindred Stamps March Release Blog Hop! We have 7
stunning sets for you to enjoy this month and believe me, several are on MY
wish list. I can't wait to hear which you love and must have. Make sure you
leave a comment on each blog to be entered into the drawing for a $10 Kindred
Stamps store credit! When you leave a comment, please also include your email
address so we can find you easier, you can do so in an email (at) address dot com
format if you prefer! The winner will be messaged and announced in our Facebook
Fan Club!
Kindred Stamps
Perky Penny Paper Arts
Mad Crafter's Tea Party
Milene Tiberius
R Winn Creates
Good Luck and ENJOY!
I went to work as soon as I received it in the mail. I'm going to wear out those stamps if I'm not careful. I have six cards to show you.
The first card is a favorite technique of mine -- Triple Stamping. I used two of the smaller images, stamped multiple times; but the focus of the card is the sentiment. It could be a philosophy for all of us to follow!
My next card is relatively clean-and-simple. I was so happy with all the additional characters included in this new stamp set. I used one of the additional characters (as well as the bespectacled guy!) on this card.
I am sending this next card to my niece, who is a fan of the little lady with the big glasses. I hope she enjoys my card.
I borrowed a sentiment from the Kindred Stamps Royal Throne set for my next card. It worked perfectly with these two red-headed twin brothers. I loved that the shoe prints were included in this stamp set. Mmmm! I may have to make a card with a map on it.We have a little bonus this month. Kindred Stamps has a digital image called Magic School, which coordinates with Students of Magic. I wanted to make a card spotlighting this digital stamp.
My final card uses Spellbinders Labels 7 die set, which I use whenever I want to make a card with a "book" on it. I thought I had some socks patterned paper; but, when I went to look for it, the paper I was thinking of was actually flip-flops. So I had to Google "socks" to print out the background paper.
Kindred Stamps
Perky Penny Paper Arts
Mad Crafter's Tea Party
Milene Tiberius
R Winn Creates
Clownmom Creations (that's me)
Good Luck and ENJOY!
Monday, March 12, 2018
Easter Basket
Easter is just a few weeks away, so for today's CottageCutz blog I made an Easter card. I had bought a pad of patterned paper a few weeks ago at Hobby Lobby that had several pieces that looked just like a woven basket, and I've been wanting to use it. Today is the day! My card, using one of the Spring dies (Spring Flower Eggs), is pretty simple.
To start, I cut the eggs three times -- from yellow, pale green, and purple cardstock.
To start, I cut the eggs three times -- from yellow, pale green, and purple cardstock.
Using a fine-tip glue applicator, I glued the cut-out eggs to the solid back pieces, alternating the colors.
Then I cut my cardstock:
Cream - 8 1/2" x 5 1/2"
Patterned paper - 2" x 5 1/4"
The handle was cut from tan cardstock, using the largest CottageCutz Pierced Wide Oval Frame die.
Using a wide-angle corner punch, I rounded the bottom corners of the basket-weave patterned paper.
I wrapped some purple ribbon around the oval frame/basket handle, taping it in place.
I taped the handle to the back of the basket and added the eggs. Then I adhered some foam tape strips around the basket and the frame.
Removing the protective paper from the tape, I adhered the basket to my card base. I added a large foam pop dot behind each egg and a strip of ribbon and bow to the basket, and my card was finished.
By the way, CottageCutz has a new release of some cute breakfast items called Rise and Shine. They are currently on sale at 25% off. Be sure to check them out.
CottageCutz dies used on my card are:
Subscribe to:
Posts (Atom)